STM32-Based Intelligent Temperature and Humidity Monitoring System Design
Main Article Content
Abstract
In this paper, an intelligent temperature and humidity monitoring system based on STM32 microcontroller is designed. The system uses STM32F103C8T6 as the main controller, and the DHT11 sensor collects ambient temperature and humidity data, displays it in real time through the OLED display, and uses the buzzer to realize the over-limit alarm function. The experimental results show that the system has high measurement accuracy, fast response speed and low cost, and is suitable for temperature and humidity monitoring in agricultural greenhouses, warehousing and logistics, smart home and other scenarios.
Article Details
This work is licensed under a Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.
References
Wang L, Zhang H. Design of greenhouse environment monitoring system based on wireless sensor networks[J]. Computers and Electronics in Agriculture, 2020, 169: 105178.
Liu Y, Chen X, Wang Z. IoT-based temperature and humidity monitoring system for smart agriculture[J]. IEEE Access, 2021, 9: 45678-45689.
STMicroelectronics. STM32F103x8 datasheet: Medium-density performance line ARM-based 32-bit MCU with 64 or 128 KB Flash, USB, CAN, 7 timers, 2 ADCs, 9 communication interfaces[EB/OL]. (2015-08-01)[2026-03-15]. https://www.st.com/resource/en/datasheet/stm32f103c8.pdf.
Li Ming, Wang Qiang. Development and Application of Embedded System Based on STM32[M]. Beijing: Electronics Industry Press, 2022: 45-78.
Aosong Electronics. DHT11 humidity and temperature sensor datasheet[EB/OL]. (2020-03-10)[2026-03-15]. https://www.aosong.com/userfiles/files/media/DHT11%20Datasheet.pdf.
Solomon Systech. SSD1306 128×64 dot matrix OLED/PLED segment/common driver with controller datasheet[EB/OL]. (2018-05-01)[2026-03-15]. https://www.solomon-systech.com/files/ssd1306.pdf.
Zhang Wei, Liu Yang. Microcontroller Principle and Interface Technology[M]. Beijing: Tsinghua University Press, 2021: 112-135.
Brown T, Davis K. Embedded systems design: An introduction to processes, tools, and techniques[M]. 3rd ed. New York: CRC Press, 2019: 89-102.